Page 196 - Water_Controls_for_Healthcare

/ Safety controls solutions

SAFETY CONTROLS:
SPECIFICALLY DESIGNED FOR RAPID DECONTAMINATION

In order to address the risk of contamination to the body, Efficient
face and/or eyes posed by harmful chemicals, DELABIE's safety controls deliver large flow rates
DELABIE has developed a range of safety controls. which ensure rapid decontamination:
DELABIE's safety showers and eye wash stations - Eye wash stations: flow rate 20 lpm at 3 bar dynamic
provide users with an efficient decontamination pressure.
Even, conical flow facility at the site of the incident, especially during - Showers: flow rate 96 lpm at 3 bar dynamic
the initial treatment phase. pressure.
The diameter and position of the 74 holes
Safety in the shower head are designed for optimised rinsing.
The shower head with spray diffuser ensures
an optimised spray for the whole body. The diameter User comfort
and orientation of the diffuser ensures an even, The protective caps eject automatically with
conical flow. the pressure when the equipment is activated.
The spray heads are fitted with aerators and stainless The spray heads are fitted with aerators which ensure
steel double filters to prevent any large debris a gentle spray to avoid further injury to the user.
in the water pipes coming into contact with the eyes.
Protective caps prevent dust and other airborne Quick to install
Optimised rinsing for eyes DELABIE's safety controls are quick and easy to install.
contaminants entering the valve. The controls
are easy to access. A mixed, potable water supply should be considered
(DELABIE recommends installing a thermostatic
Reliable mixing valve depending on the nature and flow rate
DELABIE's safety controls are fitted with frost-free of the equipment, see the DELABIE "Commercial
mechanisms as standard (see below). Water Controls" catalogue DOC 609 UK).
They are made from corrosion-resistant materials. So that the location of the safety controls can be
easily identified, green identification signs
Frost-free system as standard are supplied with each item.
Most safety equipment is installed outside
or in buildings that are not heated. Easy to operate
Frost-free system comes DELABIE's safety controls are fitted with frost-free DELABIE's safety controls are designed to be quick
and easy to operate.
as standard systems as standard and can be installed inside
or outside buildings. Water flows when the triangular handle is pulled,
The frost-free system ensures that the riser column the foot pedal is pressed or the hand control is pulled
and shower head will deliver a proper spray with every towards the user.
use (see below). Compliance
YEAR The upstream supply pipework must also DELABIE's safety controls comply with the following
be protected from freezing temperatures.
European standards:
- Safety showers: European standard EN15154 1.
WARRANTY - Eye wash stations: European standard EN15154 2.
- Identification signs: International standard ISO
The horizontal 3864 1 covering graphic symbols, safety colours
section drains via and safety signs in the work place and public places.
the shower head
This standard is included in the European directive
92/58/CEE and at an international level by
ISO 3864 1.
YEARS The vertical
section drains
by gravity when AND ALSO...
REPAIRABILITY the valve
is closed Easy to maintain
Standard parts can be replaced without dismantling
the equipment. Maintenance staff can change
the parts quickly and easily.
The equipment must be checked every 15 days
to ensure that it is in good working order.
30-year warranty against any manufacturing defect.
Water supply 50 years repairability.

194 Safety controls