Page 63 - Professional_Catering
P. 63
Electronic controls BINOPTIC wall-mounted /
BINOPTIC
Cross wall or recessed electronic mixer or tap with mains supply
NON-CONTACT CONTROLS
• Independent IP65 electronic control unit.
• 230/12V mains supply with transformer.
• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.4 - 6 lpm.
• Scale-resistant flow straightener.
• Adjustable duty flush (pre-set flush ~60 seconds every 24 hours after last use).
• Active, infrared presence detection, sensor at the end of the spout optimises detection.
• Filters, solenoid valves and Ø 15mm conical inlets. Standard lever
• Chrome-plated brass body.
• Cable L. 1.50m for sensor, flexibles and mounting all pass through the same hole
on the cross wall versions.
• Anti-blocking security.
• Spout with smooth interior and low water volume (reduces bacterial development).
• Side temperature control with adjustable maximum temperature limiter on the mixers.
• Recommended installation height: 110 - 200mm above the top of the basin.
• 10-year warranty.
Ø 60
110 max
1/2"
230
200 17
105 x 75 x 40
110x75x40
BINOPTIC MIX cross wall mixer
Ø 15mm for compression fittings 379MCH15 Ø15
BINOPTIC wall-mounted tap
Recessed spout L. 200mm 379ENC15
Ø 15
For walls ≤ 190mm, spout L. 205mm 379DER15
For walls ≤ 190mm, spout L. 135mm 379D1315
We recommend installing a TMV for taps (see page 86)
For long lever, please add L after the reference
379MCH15 379ENC15
Non-contact controls 61